Why Billi
Billi launched the world's first underbench boiling and chilled filtered water system in the early 1990s and was instantly recognized as the premium product of choice because of its high functionality, energy efficiency and space-saving design.
Space Saving & Energy Efficiency
UNDERBENCH TECHNOLOGY
With limited space in Singapore, apartment’s living areas, especially the public housing has remained small over the past decades. Our Billi range is designed to be compact and is able to fit into most cabinets. Our largest Quadra unit is measuring only at 315mm x 465mm x 340mm in dimensions! It requires a space of no more than 500mm in length, depth and height.
WASTE HEAT RECOVERY & ENERGY SAVING
Utilizing a patented heat-exchanger system, Billi Quadra reuses waste heat produced from the chilling process to pre-heat the water before it enters the boiling tank. This makes for a very substantial saving in the power required to reach and maintain optimum temperature. With this heat-exchanger system, Billi’s air-cooled system generates far less heat than traditional air-cooled systems.
WATER-COOLED TECHNOLOGY
Billi is the only manufacturer to offer both water-cooled and air-cooled options. As mentioned earlier, water is pre-heated with our heat-exchanger system. This water also acts as a cooling agent to cool down the machine as it passes through them. Using water-cooled system allow us to remove fan from the machine and hence saving the energy to run them. There is no need for unsightly air ventilation grilles on cabinets anymore!
TIME-SWITCH AND STANDBY MODE
An inbuilt 7-days time-switch ensures the system is running only when it is needed, eliminating unnecessary out-of-hours power consumption. Users can set the time to the start and stop the boiling and chilling of water at their convenience. Users can also choose to enable the standby mode to further reduce power consumption. When enabled, standby is invoked after two hours from the time of last use and the system’s water hot and cold set point is automatically set to 72°C & 18°C respectively. Normal operation is resumed when the tap is pressed.
Safety & Users Functionality
SAFETY LOCK
To prevent accidental dispensing of boiling water, Billi added a safety feature to ensure zero accident when using our system. The red padlock icon is lighted up when the safety switch is activated. To dispenser boiling water, users just need to touch the safety switch located at the back of the levers to unlock it. The safety mode will automatically be reactivated after eight seconds of idling.
SPLASH-FREE TECHNOLOGY
Billi’s trademark Splash Free boiling water dispenser electronically varies the water flow. Water flow will increase gradually to eliminate splashing as the water first enters the cup.
TAP SWIVEL FEATURE
A unique swivel action allows users to rotate the tap if more sink space is required.
Modern Design & Dispenser Options
STYLISH TAP DESIGN & OPTIONS
The result of much collaboration with architects, designers and consumers was a new range of sophisticated, stylish tapware that perfectly complements the style of its surroundings. Users can choose a dispenser from our standard XL Levered, XT Touch or the XR Remote.
Read more about our dispenser
here.
TYPE OF FINISH
Dispensers are available in Chrome, Brushed or Matt Black.